[2026] C++ vector reserve vs resize: When to Use Which (Complete Guide)

Contiguous dynamic arrays (like std::vector) are the usual way to implement the “array” side of arrays and lists—this article focuses on capacity vs length inside that model.

Introduction: “Should I use reserve or resize?"

"Don’t both make the vector bigger?”

In C++, vector::reserve and resize do completely different things. reserve only increases capacity; resize changes size and initializes elements. 아래 코드는 cpp를 사용한 구현 예제입니다. 각 부분의 역할을 이해하면서 코드를 살펴보시기 바랍니다.

std::vector<int> vec;
// reserve: capacity only
vec.reserve(100);
std::cout << vec.size() << '\n';      // 0
std::cout << vec.capacity() << '\n';  // 100
// resize: size + initialization
vec.resize(100);
std::cout << vec.size() << '\n';      // 100
std::cout << vec.capacity() << '\n';  // 100

This article covers:

• reserve vs resize
• Performance comparison
• Usage scenarios
• Practical tips

---

Table of contents

1. reserve vs resize
2. Performance
3. Usage scenarios
4. Examples
5. Summary

---

1. reserve vs resize

reserve: capacity only

아래 코드는 cpp를 사용한 구현 예제입니다. 각 부분의 역할을 이해하면서 코드를 살펴보시기 바랍니다.

std::vector<int> vec;
vec.reserve(5);  // capacity at least 5
std::cout << vec.size() << '\n';      // 0 (unchanged)
std::cout << vec.capacity() << '\n';  // 5
// vec[0] = 42;  // undefined behavior (size is 0)
vec.push_back(10);  // OK
std::cout << vec.size() << '\n';  // 1

resize: size change + initialization

아래 코드는 cpp를 사용한 구현 예제입니다. 각 부분의 역할을 이해하면서 코드를 살펴보시기 바랍니다.

std::vector<int> vec;
vec.resize(5);  // size 5, value-initialized to 0
std::cout << vec.size() << '\n';      // 5
std::cout << vec.capacity() << '\n';  // at least 5
vec[0] = 42;  // OK
std::cout << vec[0] << '\n';  // 42
std::cout << vec[1] << '\n';  // 0 (initialized)

Comparison table

Aspect	reserve(n)	resize(n)
size	Unchanged	becomes n
capacity	at least n	at least n
Initialization	None	default value
Index access	Only within size	Yes
push_back	Yes	Yes

---

2. Performance

Benchmark: push_back

다음은 cpp를 활용한 상세한 구현 코드입니다. 필요한 모듈을 import하고, 반복문으로 데이터를 처리합니다. 각 부분의 역할을 이해하면서 코드를 살펴보시기 바랍니다.

#include <benchmark/benchmark.h>
// No reserve
static void BM_PushBack_NoReserve(benchmark::State& state) {
    for (auto _ : state) {
        std::vector<int> vec;
        for (int i = 0; i < 1000000; ++i) {
            vec.push_back(i);
        }
    }
}
BENCHMARK(BM_PushBack_NoReserve);
// With reserve
static void BM_PushBack_Reserve(benchmark::State& state) {
    for (auto _ : state) {
        std::vector<int> vec;
        vec.reserve(1000000);
        for (int i = 0; i < 1000000; ++i) {
            vec.push_back(i);
        }
    }
}
BENCHMARK(BM_PushBack_Reserve);
// resize
static void BM_Resize(benchmark::State& state) {
    for (auto _ : state) {
        std::vector<int> vec;
        vec.resize(1000000);
        for (int i = 0; i < 1000000; ++i) {
            vec[i] = i;
        }
    }
}
BENCHMARK(BM_Resize);

Results (GCC 13, -O3):

BM_PushBack_NoReserve    50 ms  (many reallocations)
BM_PushBack_Reserve      10 ms  (no reallocations)
BM_Resize                 8 ms  (fastest)

---

3. Usage scenarios

reserve: before push_back

아래 코드는 cpp를 사용한 구현 예제입니다. 반복문으로 데이터를 처리합니다. 코드를 직접 실행해보면서 동작을 확인해보세요.

// reserve: grow with push_back
std::vector<int> vec;
vec.reserve(1000);
for (int i = 0; i < 1000; ++i) {
    vec.push_back(i);
}

resize: index access

아래 코드는 cpp를 사용한 구현 예제입니다. 반복문으로 데이터를 처리합니다. 코드를 직접 실행해보면서 동작을 확인해보세요.

// resize: direct indexing
std::vector<int> vec;
vec.resize(1000);
for (int i = 0; i < 1000; ++i) {
    vec[i] = i;
}

resize: fill with a value

아래 코드는 cpp를 사용한 구현 예제입니다. 코드를 직접 실행해보면서 동작을 확인해보세요.

// resize: initialize to a specific value
std::vector<int> vec;
vec.resize(1000, 42);
std::cout << vec[0] << '\n';    // 42
std::cout << vec[999] << '\n';  // 42

---

4. Examples

Example 1: reading a file

아래 코드는 cpp를 사용한 구현 예제입니다. 반복문으로 데이터를 처리합니다. 코드를 직접 실행해보면서 동작을 확인해보세요.

// reserve: unknown line count
std::vector<std::string> lines;
lines.reserve(1000);
std::ifstream file("data.txt");
std::string line;
while (std::getline(file, line)) {
    lines.push_back(line);
}

Example 2: converting from an array

아래 코드는 cpp를 사용한 구현 예제입니다. 반복문으로 데이터를 처리합니다. 코드를 직접 실행해보면서 동작을 확인해보세요.

// resize: known size
int arr[100] = {/* ....*/};
std::vector<int> vec;
vec.resize(100);
for (int i = 0; i < 100; ++i) {
    vec[i] = arr[i];
}

Example 3: 2D matrix

아래 코드는 cpp를 사용한 구현 예제입니다. 반복문으로 데이터를 처리합니다. 코드를 직접 실행해보면서 동작을 확인해보세요.

// resize: 2D vector
std::vector<std::vector<int>> matrix;
matrix.resize(10);
for (auto& row : matrix) {
    row.resize(20, 0);
}
matrix[5][10] = 42;

---

Summary

Choosing reserve vs resize

Situation	Use
Growing with push_back	reserve
Direct index access	resize
Unknown final size	reserve
Known size + initialization	resize
Avoid reallocations only	resize
Need element initialization	resize

Rules of thumb

1. push_back → reserve
2. Index access → resize
3. Need initialization → resize
4. Reallocations only → reserve

Checklist

• If you use push_back, do you reserve?
• If you index, do you resize first?
• Do you need default initialization?
• Is performance critical?

---

Related reading (internal links)

• C++ vector basics guide
• C++ vector vs list vs deque
• C++ performance optimization
• C++ STL containers guide

---

Keywords (SEO)

vector reserve, vector resize, reserve vs resize, vector performance, avoid reallocation

Practical tips

Debugging

• Indexing after reserve only (size still 0) is undefined behavior.
• push_back after resize still grows size.
• capacity rarely shrinks without shrink_to_fit.

Performance

• reserve before push_back loops to avoid reallocations.
• Index-heavy code can be faster with resize + assignment.
• If you do not need initialization, prefer reserve + push_back.

Code review

• Check reserve in hot push_back loops.
• Find index writes without prior resize.
• Replace unnecessary resize with reserve when only capacity matters.

---

Closing

reserve avoids reallocations; resize changes length and initializes. Takeaways:

1. push_back → reserve
2. Index access → resize
3. Hot paths → reserve If you use push_back, reserve is the usual way to win performance. Next: dig deeper in the C++ STL container guides.

---

Related posts

• Browse the C++ series
• C++ Adapter Pattern
• C++ ADL
• C++ aggregate initialization